IMD Drive installation guide
R1724
- 4 -
SERAD S.A
1-
Introduction
1-1-
Warning
Read this manual before first installing, nonobservance may result in property
damages and in personal injuries.
Only suitable qualified personnel should undertake the mounting, installation,
operation and maintenance of the equipment must be complied with the general setup
and safety regulations for work on power installations (e.g. DIN, VDE, EN, IEC or
other national and international regulations).
It is important that all safety instructions are strictly followed. Personal injury can
result from a poor understanding of the safety requirements.
The following safety regulations should be followed:
VDE 0100
Specification for the installation of power systems
up to 1000 V
VDE 0113
Electrical equipment of machines
VDE 0160
Equipment for power systems containing electronic
components.
-
Never open the equipment.
-
Dangerous high voltages exist within the equipment and on the connectors.
Because of this, before removing any of the connectors, it is necessary to remove
the power and wait at least 5 minutes to allow the capacitors to discharge.
-
Never connect or disconnect the drive with power applied.
-
Some of the drive’s surfaces can be very hot.
Some of the drive's components are susceptible to damage from electrostatic
discharges. Always handle the equipment using appropriate anti-static precautions.
We have gone to great lengths to ensure this documentation is correct and complete. However, since it
is not possible to produce an absolutely error-free text. No responsibility will be assumed by SERAD
for all damages caused by using this documentation and software.
We reserve the right to make changes to all or part of the specification without prior notice.
