SAFETY INSTRUCTIONS
4
www.sera-web.com
WARNING
Before commissioning, installating and during operation of the
sera
dosing pump the respective regulations valid at the
place of installation are to be observed!
Compliance with these operating instructions and, in particular, the safety instructions, helps to:
■
Prevent danger to people, machines and the environment.
■
Increase reliability and service life of the product and the complete system.
■
Reduce repair costs and downtimes.
Personnel qualification and training
The personnel for operation, maintenance, inspection and installation must be suitably qualified for their tasks. The
owner must clearly define responsibility and supervision of the personnel.
If the personnel do not have the knowledge required, then personnel is to be trained and instructed correspondingly.
Such training can be provided by the manufacturer / supplier upon order of the owner. In addition, the owner has to
ensure that personnel have understood the operating instructions completely.
Dangers in the case of non-observance of the safety instructions
Non-observance of the safety instructions can result in hazards both for persons as well as for the environment and the product,
and can, for example, cause the following hazards:
■
Failure of important functions of the product.
■
Failure of prescribed methods for maintenance and repair.
■
Danger to people from electrical, mechanical and chemical influences.
Safety-conscious working
The safety instructions shown in this operating manual, the existing national accident prevention regulations and any internal
working, operating and safety regulations of the owner must be observed.
Safety instructions for owner / operator
Danger caused by electrical energy is to be avoided.
Improper operations
Operating safety of the supplied product is only guaranteed if the product is used as intended, according to the
descriptions in Chapter „Intended use“ of these operating instructions.
Intended use
The
sera
product is only to be deployed according to the intended purpose stated in the product description and the
acceptance test certificate.
If the product is to be used for other applications, then the suitability of the product for the new operating conditions
must be discussed with
sera
beforehand!
Criteria for operation in accordance with the intended use:
■
Operating conditions at the place of installation.
■
Voltage supply.
SAFETY INSTRUCTIONS
