TubTop FS™
Sequoia Spa Shelters
Position the assembled roof panels around the building
in preparation to set in place.
Place the roof panel over the top of the wall and drop
the frame into opening of the angle roof stops.
R
oo
f
p
an
e
ls
Continue setting the roof panels in place. Connect the
panels at the upper end where the panels meet using
the “W-brackets”. Connect these to the roof panel
frames using 1 ¼” pan head screws.
Installing the last roof panel may require lifting the oth-
er panels slightly in order for it to drop into place. Once
in place, check that all panels are sitting down on top of
the wall panels.
Add a second W-bracket at the lower end of the in-
stalled roof panels.
Connect the bottom frame of the roof panel to the roof
stops of the wall panel using 3 inch wood screws.
W-bracket
