TubTop FS™
Sequoia Spa Shelters
A
ssem
b
le
w
al
ls
Connect Corner panels to Back wall:
Lay the 92” back wall assembly on the ground. Use the packag-
ing material between the assembly and the ground surface to
protect the finish.
Connect the corner panels as shown below. Use a 3 inch wood
screw at the top end of the wall panel and 2 1/2” wood screws
to fasten into the side of the corner panel.
Lay the back side wall assembly on the ground to
connect the back two corner panels.
3 inch wood screw into the
top of the corner panel
2 1/2” wood
screw into
the side of
the corner
panel.
