TubTop FS™
Sequoia Spa Shelters
Introduction
Thank you for purchasing the TubTop FS™ hot tub enclosure manufactured by Sequoia Spa Shelters™. Please preview the entire
set of instructions before starting the installation. The instructions are divided into the different steps required for assembly.
Required tools for assembly
-Powered screwdriver with at #2 cross-tip (Phillips) bit.
-Measuring tape, 12 ft. minimum
-6 ft. step ladder
- 9/16” wrench (for anchor brackets
Unpacking notes
All component packages are labeled so as to identify the contents. For the purpose of part identification open packages in se-
quence as required for each assembly step. When uncrating and unpacking the components of the Escape™, care should be used
to avoid damage to the parts. The components are easily damaged by mishandling. Be extra careful when using knives and other
sharp objects in removing packaging material. Do not set components directly on to rough surfaces. Use padding or packaging
material to protect the component from abrasion.
