TubTop™
Sequoia Spa Shelters™ by Sequoiaworks Inc.
Check spac
ing
Check the spacing between the spa shell and the shelves and walls to
see if the space is even. There should be about 1 ½ to 2 inches of
clearance between the wall rail and the spa shell on the control side
(front). On the sides the shelves should be equal distance on both
sides. Remove screws that connect the shelves to the brackets to ad-
just if necessary.
1 ½ “
approx.
Equal to
opposite
side
Roo
f
p
an
el
s
Connect the le and right hand roof panel sec ons to-
gether.
The corruga ons overlap one another and the two
frames are set together.
With the frames aligned to one another, fasten the two
frames together using 2 ½ inch wood screws. (Three per
set)
Insert the flashing strip into the the C-metal trim of the
roof panel so that it is over the top surface of the corru-
gated roofing. This does not get fastened.
