TubTop™
Sequoia Spa Shelters™ by Sequoiaworks Inc.
Suppor
t B
ra
ckets
Skirt Mounted Brackets
Locate the a achment points for the spa on the Table AB-1. If
the spa is not listed, please contact us for informa on. Four
brackets are a ached to the frame of the spa through the exte-
rior skir ng of the portable spa. The typical installa on is to
a ach two brackets on each adjacent side of the control panel
side. Note: Not all portable spas have adequate framing to sup-
port the weight of the enclo-
sure. We do offer alterna ve
solu ons for these situa-
ons.
The control access door for
the spa is normally on the
same side as the control
panel. Be certain that the
brackets will not interfere
with its removal.
Place the a achment bracket just below the lip of
the spa shell.
Use #8 x 1 1/4” pan head screws to fasten the top
of the bracket into the side of the spa.
Use one #10 x 3 ½” to fasten the bracket leg to the
side of the spa.
Two #8 x 1 ¼” pan
head screws
One #10 x 3 ½”
wood screw
