41
ASSEMBLING THE PETROL BRUSHCUTTER
STEP 4
Mount the safety guard onto the lower boom
part. Additionally attach the metal mounting
plate to the gearbox.
STEP 5
Slide the protective flange onto the splined
gearbox shaft so that cutoffs in the gearbox
body and in the flange match each other.
STEP 6
Insert the Allen key into opening between
the protective flange and the gearbox. While
holding the Allen key, turn the cutting head
counterclockwise until it stops.
WHEN USING THE CUTTING HEAD
WARNING!
Do not operate the tool with the cutting head without the protective
flange. If you fail to install the protective flange before installing the cutting head,
you will not be able to remove the cutting head after you finish using the brushcutter.
