37
FIELD OF APPLICATION AND INTENDED USE
FIELD OF APPLICATION AND INTENDED USE
Field of application
The petrol brushcutter is an easy-to-use and efficient tool for cutting
grass and nonstiff weeds.
You can easily cut or trim grass at medium sized or large plots. The tool
is easy to use and requires minimum maintenance.
Our engineers have made grate efforts to apply the latest control, and
driving gear lubrication technologies, developed a range of original oils
and much more.
The petrol brushcutter is intended for cutting grass and weeds using
rotating cutting line or a cutter blade (depending on the model) driven
by a petrol-powered engine.
SAFETY INSTRUCTIONS
1. Carefully read the Manual, pointing out and focusing on the main
items, before you start working with the petrol brushcutter. Use
the brushcutter for its intended purpose only.
2. Make sure that the petrol brushcutter is fully and correctly
assembled before you start working. Check that all elements of
the tool (particularly the cutting (trimmer) head and the knife)
are correctly mounted and securely fastened. Make sure that the
safety guard is properly mounted.
3. Do not leave the petrol brushcutter unattended with the engine
running. Take all possible precautions while working with the
brushcutter if children are staying nearby. Do not allow children
to stay around.
4. The brushcutter is not intended for use by children or people with
motor impairments, as well as by people under the influence of
alcohol, drugs or medications.
5. Carefully inspect the area to be trimmed before starting the
work. To avoid possible injuries, remove glass splinters, stones,
remnants of steel reinforcement or other objects that may be
thrown by the tool when hit by cutting head or the knife.
6. Wear ear protectors, goggles or a face shield. It is forbidden to
work barefoot or in open toe shoes. Wear sturdy boots to avoid
injuries.
7. Do not immerse the brushcutter in water or any other liquid as
this can cause corrosion or damage of the working mechanisms
and failure of the tool.
8. Use the brushcutter over flat and dry surfaces only. Use cutting
line with a diameter of not more than 3.0 mm. It is forbidden to
use steel ropes or wires instead of the cutting line.
9. The fuel mixture shall be prepared of petrol with octane number
of not less than 92 and original SEQUOIA 2T-Original oil.
10. If you spilled the fuel mixture when filling the fuel tank, be sure
to move aside before turning on the brushcutter – move at least
3 meters away from the spill. Do not fill the fuel mixture with the
engine running or hot engine.
