Sequoia SEB1200D, Руководство по эксплуатации

Страница: 31 / 41

30
MAINTENANCE
MAINTENANCE
WARNING! Any maintenance works on the Electric
Brush
c
utter shall be performed only when the tool is
unplugged from the mains.
Cleaning the product
After each use, remove build-up of grass clippings from the inner
surface of the safety guard, as well as from the motor cooling
holes using a brush or compressed air can (cylinder) for cleaning.
Gearbox
Check lubrication of the gearbox once every three months. If
necessary, replace the grease or contact an authorized service centre.
Changing line in the trimmer spool
WARNING! The line is changed without disassembling the
spool.
STEP 1. Measure and cut about 4 meters of line, fold it in half.
STEP 2. Align all arrows on the spool body by rotating the knob
(Fig. 8, page 37 ) .
STEP 3. Insert two ends of the line into the slot in the spool knob and
push through until it comes out from the side guiding holes.
STEP 4. Pull the line all the way. Then feed the line to the
spool by rotating the knob
(Fig. 9, page 37 )
.
WARNING! All other maintenance works shall be carried
out only by technicians of service centres.
Автотовары
«130»
130.com.ua