Sequoia SEB1200D, Руководство по эксплуатации

Страница: 28 / 41

27
DESIGN OF THE ELECTRIC BRUSHCUTTER / ASSEMBLING THE ELECTRIC BRUSHCUTTER
DESIGN OF THE ELECTRICBRUSH CUTTER
(Fig. 1, page 3 3 )
1. Trimmer cutter blade
2.
Gearbox
3.
Safety guard
4.
Line cutter
5.
Trimmer boom
6. Boom coupler
7.
Handle
8. Lock button
9.
On/Off trigger button
ASSEMBLING THE ELECTRIC BRUSHCUTTER
Assembly
STEP 1. Installing the handle.
Remove the retaining bolt from the
handle. Place the handle on the boom and fix it with the retaining
bolt (Fig. 2, page
3 4
) .
STEP 2. Loosen clamp of the boom coupler, then insert the lower boom
part into the coupler until it clicks, while holding the boom with the
fixing hole facing upwards. Pull the lower boom part to make sure that
the latch on the boom coupler is engaged into the fixing hole. It shall
be possible to disengage properly assembled boom only by
pressing the latch
(Fig. 3, page 3 4 )
.
STEP 3. Tighten the plastic clamp until it reaches the stop. Do not
use excessive force as it may damage the locking mechanism.
STEP 4. Mount the plastic safety guard onto the lower boom
part. Additionally attach the metal mounting plate to the
gearbox.
STEP 5. Take the shoulder strap and attach the carabiner to
the attachment point on the main Brush
c
utter boom. Adjust the strap
and position of the Brush
c
utter handles for your personal
convenience in operation.
Using trimmer spool with line
STEP 1.
Slide the protective flange onto the splined gearbox shaft so
that cutoffs in the gearbox body and in the flange match each
other
(Fig. 35 , page 4 0)
.
WARNING! Actual appearance and design of products may
differ from those presented in the Manual.
Автотовары
«130»
130.com.ua