Sequoia SEB1200D, Руководство по эксплуатации

Страница: 30 / 41

29
RECONSIDERATIONS ON PRACTICAL USE OF THE ELECTRIC BRUSHCUTTER
RECONSIDERATIONS ON PRACTICAL USE OF THE
ELECTRIC BRUSHCUTTER
1. The Electric Brush
c
utter of this class is intended for household use
only. It is not recommended to use the Brush
c
utter for professional/
industrial works. The Brush c utter is not designed for continuous
operation, the recommended duty cycle: 15-minute operation/
10-minute break.
2. When using an extension cord, make sure that the mains voltage
does not exceed 230 V. The extension cord shall meet specifications
listed in the table below, otherwise voltage drop in the extension cord
may take place, and running at a lower voltage will damage the motor.
Length of the extension cord, m Minimum conductor cross section, mm
2
0-20 1.0
20-50 1.5
50-100 4.0
3.
We recommend using double insulated cables with fused plugs
for outdoor use. Regularly check plugs and extension cords, replace
if damaged. Do not use defective or non-standard extension cords,
cables, plugs. Always observe position of the cable during operation,
keep it away from the cutting zone, try not to tension the cable.
4.
Do not operate the Electric Brush
c
utter outdoors in the rain or at
high air humidity due to increased risk of short circuits.
5.
Do not allow people and pets to stay in the work area when using
the Electric Brush
c
utter.
6.
Make sure that all elements of the Electric Brush
c
utter are in good
working condition before operating the tool. Do not apply excessive
force when cutting, and do not allow contact of the working surface
with the ground – excessive load on the trimmer spool or cutter blade
may cause damage in mechanisms of the Electric Brush
c
utter.
Автотовары
«130»
130.com.ua