Sequid DTDR-65 Скачать руководство пользователя страница 40

Страница: 40 / 111

5.3 Calibration Wizard

For the user’s convenience a TTC/12TC-wizard is included in the software.

To start the wizard, please use the magic wand from the

Main Window

’s

toolbar or select

Extras

→

Three-Term Correction

from the main menu. A

selection dialog appears and lets the user choose between:

Differential TTC (DTTC, available with differential measurement modes)

Single-ended TTC (for channel 1 only, use DTTC for channel 2)

Save current TTC/12TC for immediate reload

Reload last known TTC/12TC

Reset currently loaded TTC/12TC

Full 2-port calibration (only if F2P module is available)

If you choose

, or

the TTC-wizard will guide you through the neces-

sary steps towards a reliable TTC, DTTC or 12TC; nevertheless subsequently

some helpful remarks are enlisted:

•

In the start window, an existing TTC/12TC can be reloaded. Please

ensure that the currently used measurement setup (in the first place

the attached cables and time base settings of the device) is identical

to that of the original TTC/12TC.

•

If a TTC/12TC is loaded from a previously

wizard-saved

file, the wiz-

ard jumps directly to the last window and you are done. This is only

necessary if different TTCs/12TCs (e.g. for different time bases) shall

be handled in parallel.

Please note:

This feature will become obsolete in future software releases. It

is recommended to save TTC/12TC calibrations as standard project mas-files

instead of wizard-saved sqc-files.

Содержание DTDR-65
















































































































Результаты поиска

Содержание DTDR-65

Отзывы:

Sequid DTDR-65, Руководство по эксплуатации, Страница: 40 / 111

Результаты поиска

Содержание DTDR-65

Отзывы: