•
The company name and address is printed e.g. in the PDF reports.
•
If
Load Project on Startup
is checked, the last known project file is
automatically reloaded on startup.
•
If
Restore Windows Position
is checked, the last known window ar-
rangement is restored.
•
The software automatically saves backups to the user’s application
folder, and the backup interval can be set (minutes). If set to ”0”, im-
mediate backup is activated, if set to ”-1”, backup is completely turned
off (this is NOT recommended).
Device tab:
•
In most cases the software is started with a connected device and it is
intended to connect automatically. However if the software shall be
started with a
Sequid Viewer Key (SVK)
it is possible to deactivate the
Auto-Connect
on Startup.
•
Data Rate
: data transfer rate between device and software (read only)
•
The
Single Shot Measurement
box should be checked, if all average
measurements shall be carried out at once. Otherwise all measure-
ments can be performed separately. This may be desirable in some
very specific applications. By default this option is turned on.
•
In some rare cases it may be necessary to switch off the instable signal
protection during measurements, for this purpose the
Ignore Instable
Signal
box can be checked. Usually this option should be unchecked.
•
The last valid TTC is loaded automatically in case the corresponding
box is checked.
•
In the
ESD auto-protection
field, the number of seconds is set after
which the device switches on the ESD-protection automatically.
26