Sequid DTDR-65, Руководство по эксплуатации, Страница: 15 / 111

•
Meta and system diagnostic data
To create a new Sample, simply type a new name in the first empty line of
the Sample List . On creation, only the name has to be defined, all other
parameters are defined according to the current system settings (e.g. time
base, frequency, measurement mode, test standard).
With very few exceptions, the settings can also be made or changed later.
How to change the settings for a single or multiple Samples is explained
later in the course of this manual. To get an overview of the settings to
be changed, right-click an existing Sample in the list and select the Change
Samples Settings menu item or open the Impedance Measurement Proper-
ties Window , as described in section 6.1.3 .
3.5.1.2 Sample List
Basically the Sample List is collection of Samples as described in subsec-
tion 3.5.1.1 . The following is a list of the table columns as shown in Fig. 1 :
Sample Name : Measurement label, which must be a non-empty string. A
new sample can be generated by filling in this field. Special characters should
be avoided.
Description : Field for storing some additional information for each sample
(not mandatory)
Channel : Indicates the selected channel(s) for the sample. Not directly ed-
itable.
Result : Indicates overall result for the measurement, content depends on
measurement mode. Not available in all modes and not directly editable.
3.5.1.3 Macro List
The Macro List is suitable for performing recurring series measurements.
Macros can be defined similar to Samples . When working in macro mode
15