Sequid DTDR-65 Скачать руководство пользователя страница 104

Страница: 104 / 111

17.3 Safety Symbols & Terms

Where the following symbols or terms appear on the instrument front or

rear panels, or in this manual, they alert you to important safety considera-

tions.

This symbol is used where ESD-precautions are re-

quired. This is especially true if the fully integrated

ESD-protection is disabled (e.g. during a measure-

ment).

This symbol is used to denote a safety ground con-

nection.

Power On / Standby (Off).

17.4 Safety Requirements

This safety instruction section contains information and warnings that must

be observed to keep the Sequid DTDR-65/STDR-65/STDT-65/DTDR-800 de-

vices operating in a correct and safe condition. You are required to follow

generally accepted safety procedures in addition to the safety precautions

specified in this section.

a. USE PROPER CORD:

Use only the power supply and power cord shipped with this instru-

ment and certified for your country.

104

Содержание DTDR-65
















































































































Результаты поиска

Содержание DTDR-65

Отзывы:

Sequid DTDR-65, Руководство по эксплуатации, Страница: 104 / 111

Результаты поиска

Содержание DTDR-65

Отзывы: