Sepura SCG22 Series, Руководство по установке

Страница: 7 / 40

5
If a connector is not in use, the dust
covers or seal bungs provided must
be fitted to reduce the risk of damage
or dust/moisture ingress.
Protect the rear connectors
and connecting cables from
the risk of impact damage.
WARNING! The heatsink may become hot after long
periods of transmission. Ensure accidental contact
with the heatsink is not possible.
Location Considerations
The SCG22 must be fitted within the interior of the vehicle
(excluding the engine compartment) and protected from the external
environment and vehicle cleaning operations.
Locate the SCG22 away from sources of strong electromagnetic interference
including cables powering the starter motor or the electric traction motor in
electric vehicles.
Ensure that the installation does not impede the normal operation of the
vehicle, including the operation of any safety devices such as airbags and
seatbelt retainers.
The SCG22 should be positioned so that it does not obstruct, or become at
risk of damage from, any occupant or carried items.
Ensure the heatsink fins are in
free air as much as possible.
Mount the SCG22 with the
top of the heatsink facing
upwards as shown.
Ensure sufficient space is provided above the installation to allow fitment and
removal of the SCG22.
Temperature and Orientation Considerations
Reliable transmit operation will be achieved if the SCG22 is mounted such that
the heat sink fins receive a free flow of air, i.e., if it is mounted within 15° of the
normal vertical orientation with no restriction to the flow of convected air. For
any other orientation, varying degrees of degradation may result.
Fitting the SCG22 or console on top of the dashboard is not recommended.
Exposure to direct sunlight may cause the temperature to rise to over 80
°C (176°F). Prolonged exposure to these temperatures may damage the
equipment and invalidate any product warranty.
Do not mount the SCG22 close to a heat source, e.g., in front of a heater vent.