Sepura SCG22 Series, Руководство по установке

Страница: 4 / 40

2
Unpacking
Unpack the container(s) and ensure that all items specified on any delivery
note are present and received in good condition.
If any of the goods are damaged or not supplied, contact your service provider
within 10 days of receipt of equipment.
Consoles or accessories are not shipped in the container with the SCG22
mobile radio due to the many combinations available.
Note that the accessory pack must be specified at the time of ordering.
ALWAYS keep documentation supplied with the product for future reference
and pass on to any person who is responsible for operating the product.
SCG22 Model Variant Options
The SCG22 mobile radio is supplied in model variants, with different functions
and connections to suit the installation. This installation guide describes all the
functionality and connections available, highlighting options where appropriate.
Console Options and Accessories
There are many options available for the installation of the SCG22. Depending
on the model variant, the SCG22 can accommodate up to two remote
consoles, for example an SCC3 and an HBC3, with additional accessories
such as a fist microphone or handset connected through the SCC3.
The mobile radio is designed to be installed within a vehicle, on a motorcycle
or as a standalone unit within an office environment using a Desk Mount Unit
(DMU).
There are a number of vehicle, motorcycle and desktop accessories that can
be attached to the SCC3. Refer to the installation instructions supplied with
these products. See our website for more information (sepura.com).
Safety Information
READ THE TETRA PRODUCT SAFETY GUIDE (SPR-DOC-00170)
SUPPLIED WITH THE SCG22 FOR IMPORTANT INFORMATION
ABOUT SAFELY OPERATING THIS PRODUCT.
ALWAYS POWER OFF the mobile radio in environments where RF wireless
devices could potentially cause an explosion. Potentially hazardous areas are
not always signed. Obey all signs and instructions relating to the usage of RF
wireless devices.
DO NOT touch the antenna when the mobile radio is powered on.
In order to reduce the risk of RF burns, the antenna must always remain
connected when the equipment is powered on. DO NOT connect or
disconnect the antenna whilst the equipment is powered on.
Potential risk of burn injury. DO NOT touch the heatsink fins when the
transceiver is powered on.
ONLY fit an approved accessory. If a non-approved accessory is fitted, it may
compromise the product safety ratings and may void any product warranty.
DO NOT attempt to dismantle this product. Servicing and repairs to this
product must be performed by trained service technicians at Sepura approved
service centres.
Exposure to RF Energy
Sepura designs and manufactures products to meet strict guidelines and
international standards relating to Radio Frequency (RF) energy and the
potential health risks associated with using RF wireless devices. If you have
any concerns relating to long term health risks associated with using RF
wireless devices, you should obtain advice from your employer.
Operation
It is the responsibility of the person operating the product to ensure that it is
operated safely at all times, and that local laws and regulations governing the
usage of Radio Frequency (RF) wireless devices are observed. Obey all signs
and instructions relating to the usage of RF wireless devices.
Regulatory Compliance
This product must be installed in accordance with national and local radio
communications authorities and/or Health and Safety regulations.
This product may affect public broadcast radio, security code alarm systems
and some engine management systems.
Isolating Power
Vehicle Installation
CAUTION! The fuse in the power supply line must be
used as the isolation mechanism and removed before any
connections are made to the SCG22.
Desk Mount Unit (DMU) Installation
CAUTION! The power supply connector must be used as
the isolation mechanism and must be removed before any
connections are made to the SCG22.