Sepura SCG22 Series Скачать руководство пользователя страница 35

Страница: 35 / 40

When used in conjunction with the HBC3, the soft key of the remote

microphone and switches accessory is only operational with the interface

box revision 2.0 or later.
To enable it with the revision 1.0 interface

box, an additional shorting link must be added

between pins 4 and 6.

The revision of the interface

box is indicated by the fourth

digit of the serial number on

the product label.

Programming/Customising the SCG22

Before re-programming or customising the internal software in the SCG22

you will need the following items:

• Radio Manager 2
• Power connection to the SCG22

Connect one of the power lead options to the Power/Ignition connector

on the rear panel of the SCG22. The red and black wires in the power

lead should be connected to a suitable power supply set to 12 V nominal

with a rating of 5 A. Connect the blue ignition wire in the power lead

to the positive terminal on the power supply. All other wires may be

left unconnected. For more information see the section "DC Supply

Connection" on page 16.

Programming

To program the SCG22, connect the USB Programming Lead (300-

02009) to the GPIO 1 Connector on the rear panel of the SCG22 and a

spare USB socket on the PC running Radio Manager.

Customising

To customise the SCG22, use either a:

• USB connection

: Described above for programming

• Serial connection

: Connect to the PC com port via the Dedicated

Data Cable (DDC) from the rear panel of the SCC3 or to a

USB port using the USB Data Cable from the Front Accessory

Connector (VAC).

IMPORTANT!

Only use the USB Programming Lead

to program the SCG22. Programming is not supported

by using a serial connection.

Содержание SCG22 Series









































Результаты поиска

Содержание SCG22 Series

Отзывы:

Похожие инструкции для SCG22 Series

Бренды по названию

Популярные бренды

Sepura SCG22 Series, Руководство по установке

Результаты поиска

Содержание SCG22 Series

Отзывы:

Похожие инструкции для SCG22 Series

Бренды по названию

Популярные бренды