Sepura SBR8000, Инструкция по установке и эксплуатации

Страница: 9 / 15

Installation and Operation Guide
7
Controls, connectors and components
Refer to the illustration for the location of the following controls,
connectors and buttons.
(1) Handles
(2) Status indicators
(3) Power switch
(4) GPS antenna connector
(5) Accessory connector
(6) Ethernet (RJ45) connector
(7) AC power input connector with fuse holder
(8) Grounding point
(9) Transmit antenna connector (N-type)
(10) Fan
(11) Heat sink
(12) Receive antenna connector (BNC)
(13) DC connector
Status indicators
The LEDs on the front panel indicate various operational states.
LED Description
TX-A Indicates slot 1 is transmitting.
RX-A Indicates slot 1 is receiving.
TX-B Indicates slot 2 is transmitting.
RX-B Indicates slot 2 is receiving.
Repeater mode. Illuminated when the repeater is
active. Not lit when the repeater is inactive.
Analogue mode. For analogue or mixed signals the
LED flashes when active. Not lit when the repeater
is inactive.
Digital mode. For digital or mixed the LED flashes
when active. Not lit when the repeater is not active.
Alarm mode. Illuminates when there is a problem
with the repeater. See Basic Operation.
Illuminates when the repeater is powered on.