background image

 

4

 

DMR Repeater SBR8000, SCR8000, SER8000 

located or operating in conjunction with any other antenna or 
transmitter. 

The antenna should be installed and operated with a minimum 
distance of 1.2m to any person. 

Cette radio a été conçue pour un usage professionnel dans un 
environnement contrôlé, où les utilisateurs sont pleinement 
conscients du danger potentiel de l’exposition à laquelle ils sont 
soumis et peuvent exercer un contrôle sur cette exposition. Ce 
dispositif radio N’EST PAS autorisé pour l’ensemble de la 
population, les consommateurs en général, ni pour une 
utilisation similaire.  Cet émetteur ne doit pas être co-localisés 
ou fonctionner en conjonction avec une autre antenne ou 
émetteur. 

L’antenne doit être installé et utilisé avec un minimum de 1.2m 
de distance de toute personne. 

 

Repeater technical specifications 

Frequency Range: 

 

VHF....................................................................... 136-174 MHz 
UHF ...................................................................... 400-470 MHz 

Dimensions (WxDxH) ..................... 482.5 x 338.5 x 132.5 mm (3U) 

Weight .................................................................................... 12.5 Kg 

Power Supply AC .................................... [email protected] 50/60 Hz 

 

[email protected] 50/60 Hz 

Power Supply DC ................................................. 10.8 – 15.6V@15A 

DC Fuse .............................................................................. 13.6V15A 

AC Fuse ...................................................... 2.5A 250V AC, 5x20mm 

Fuse Type .............................................. HRC ceramic, Time lag (T) 

Power Rating............................................................................. 240W 

Working temperature range.................... -30 to 60

o

C (-22 to 140

o

F) 

Transmitter Power Output: 

 

25W/40W ........................................................ 400-470 MHz 

25W/45W ........................................................ 136-174 MHz 

 

For more technical information about this product, refer to the 
product technical datasheet available from our website.  

Содержание SBR8000
















Отзывы: