Sentry ST 653, Инструкция по эксплуатации

Страница: 9 / 13

To configure advance functions, simply use the
"
F
" button to set parameters. The sequential
operations and the corresponding explanations
are shown in the following flow-chart.
4-4 Advance Function
6
Gun-Type Professional Infrared Thermometer
SCAN
AUTO
DATA
MAX
Data Mode
MIN
EMS
Parameter Setup mode
Scan and display the
temperature during
measurement.
Continuously measure and
display the temperature
without pulling the trigger.
Activate the data record
function when pull the trigger
and recall the stored data by
using or button.
The maximum temperature
during one measurement.
The minimum temperature
during one measurement.
The temperature differential
during one measurement.
Highest alarm temperature
setting.
Lowest alarm temperature
setting.
( *The parameters are adjusted
by using or buttons.)
T
AVG
.
The average temperature
during one measurement.
LAL
HAL
Adjustable emissivity for
better accuracy on all surfaces.
(Note: While triggering to
record, the new data will
replace the existing data on
the next storage space!)