background image

Read the following safety information carefully 
before attempting to operate or service the meter. 
Only qualified personnel should perform repairs or 
servicing not covered in this manual.

2.Safety Information

2

                  

Gun-Type Professional Infrared Thermometer 

         

DO NOT submerge the unit in water.
This product is not designed for use in medical 
evaluations. The product can only be used to 
measure body temperature simply for reference. 
They are meant for industrial and scientific 
purposes.  

2-1 Cautions!

2-2 Safety symbols

Dangerous, refer to this manual before using 
the meter.
CE Certification.

Laser Warning Note!

      

 Do not point laser directly at eye. Use 

caution a round reflective surfaces. Keep out of 
reach of children.

This instrument conforms to the following standards:

EN61326:

Electrical equipment for measurement, 

control and laboratory use.

IEC61000-4-2:

Electrostatic discharge immunity test.

IEC61000-4-3: 

Radiated, radio-frequency, 

electromagnetic field immunity test.

IEC61000-4-8: 

Power frequency magnetic field 

immunity test.

  Tests were conducted using a frequency range of 80-
1000MHz with the instrument in three orientations. The 

o

o

average error for the three orientations is  0.5 C ( 1.0 F) at 
3V/m throughout the spectrum. However, between 781-
1000MHz at 3V/m, the instrument may not meet its stated 
accuracy.

Содержание ST 653














Отзывы: