Sentiotec IS1, Инструкция по установке и эксплуатации

Страница: 16 / 116

Table of contents
1 General safety information 3
2 Use as intended 4
3 Installation instructions – only for experts 4
3.1 Preparation of the surface mounting 4
3.2 Preparation of the mounting – countersunk mounting 5
3.3 Preparation of the electrical connection – open housing 5
4 Electrical connection 6
5 Mounting of the control unit 7
5.1 Removal of the front lid 7
5.2 Surface mounting 7
5.3 Countersunk mounting 8
7 Changing of heating time limitation 8
8 Remote start 9
8.1 Remote start with continuous contact 9
8.2 Remote start with impulse contact 9
9 Operating and display elements 10
10 Rapid start 10
11 Description of the functions and operating elements 11
11.1 On/off button
1
11
11.2 Light button
2
11
11.3 + button
3
11
11.4 Mode/OK button
4
11
11.5 - button
5
11
11.6 Temperature and running time indicator
6
11
11.7 Selection of temperature
7
11
11.8 Selection of running time
8
11
12 Troubleshooting 12
12.1 E1 - Damage to the safety temperature limiter 12
12.2 E2 - Cabin sensor - interruption 12
12.3 E3 - Cabin sensor - short circuiting 12
12.4 E4 - Film sensor - interruption 12
12.5 E5 - Film sensor - short circuiting 12
12.6 E6 - Film excess temperature error 12
13 Technical data 13
14 Accessories and spare parts 13
15 Warranty clauses 14
15 Disposal 14
16 Scope of supply 14
WE DO IT FIRST.
Instructions for installation and use P. 2/14