Sensormetrix
Basingstoke Road
Spencers Wood
Reading
Berkshire RG7 1PW
UK
+44(0)118 976 9023
+44(0)118 976 9020
www.sensormetrix.co.uk
sales
fax
email
web
A member of the Olancha Group Ltd
Registered in England No. 4004881
VAT Registration No. GB164 5653 45
22
Argon 100
Hardware User Manual
Rev 1.2
5.1. Connect the proton-1 adapter to the RS232
connection on the Argon unit.
5.2. Power off the Argon, wait 8-10 seconds and power
up the Argon.
5.3. The green status light on the Proton-1 will now
rapidly bink to indicate it’s in programming mode.
5.4. Connect a temp-sense probe to the Proton-1.
5.5.
Wait 20 seconds and the light will blink steadily once
per second on each successful temperature read.
6. SMS Setup
Now send an sms from your mobile phone to set up the unit.
To confirm your Argon unit is setup and working succesfully on the GSM network, send the
following SMS from your mobile phone. The default password to communicate with the Argon
via SMS is
‘
connect
’.
Message:
connect status
Reply: Status: Sens1: 24°C (current temperature)
(expect typically a 40-60sec delay to receive SMS)
Next we’ll add a useful configuration to the Argon.
The following setup will add an SMS alert on sensor 1 called “Server Room” to be sent via SMS
to “+447770111111”
An alert will be sent if temperature falls outside the range specified. An additional alert will be sent
once the temperature falls back within the specified range - after being outside of the range.
Send these SMS messages to configure unit:-
connect sensor 1 +015.0 +025.0 both ServerRoom
Send as seperate SMS. (add your own mobile number)
connect notify alert sms +447770111111
For extended SMS configuration please refer to the “Argon Series Manual”. Argon can also
be configured via Windows Application “Argon Config Tool”
5. Connect Proton-1 and 1x Temp Sensor
