manualshive.com logo in svg

SENSORMETRIX Argon 100, Руководство пользователя по оборудованию

Поделиться
Скачать
SENSORMETRIX Argon 100 Скачать руководство пользователя страница 18

Sensormetrix

Basingstoke Road

Spencers Wood

Reading

Berkshire RG7 1PW

UK

+44(0)118 976 9023
+44(0)118 976 9020

[email protected]

www.sensormetrix.co.uk

sales
fax
email
web

A member of the Olancha Group Ltd

Registered in England No. 4004881
VAT Registration No. GB164 5653 45 

18

Argon 100

Hardware User Manual

Rev 1.2

Power Supply

•  Use a high-quality power supply cable with low resistance. This ensures that 

the voltages at the connector pins are within the specified range, especially 
during the maximum peak current of approximately 2A.

•  When the unit is powered from a battery or a high current supply, connect a 

fast 1.25A fuse in line with the positive supply. This protects the power cabling 

and terminal from damage.

Installing the Modem

Before installing the terminal please take into account the amount of additional 

space required for the mating connectors and cables that will be used with the 
terminal in the application.

•  Where access is restricted, it may be easier to connect all the cables to the 

modem prior to securing it in the application.

General Precautions

The Argon terminal is a standalone item designed for indoor use only. For use 

outside it must be installed in a weatherproof enclosure.

Do not exceed the environmental and electrical limits as specified.

•  Avoid exposing the terminal to lit cigarettes, naked flames or to extreme hot or 

cold temperatures.

•  Never try to dismantle the modem. There are no components inside the 

modem that can be serviced by the user. If you attempt to dismantle the 
modem, you will invalidate the warranty.

• 

The Argon terminal must not be installed or located where the surface 

temperature of the plastic case may exceed 85°C.

• 

All cables connected to the Argon terminal must be secured or clamped, 

immediately adjacent to the modem’s connectors, to provide strain relief and 

to avoid transmitting excessive vibration to the modem in the installation.

• 

Ensure the power cable to the Argon terminal does not exceed 3 metres.

•  To protect power supply cables and to meet the fire safety requirements when 

the unit is powered from a battery or a high current supply, connect a fast 
1.25A fuse in line with the positive supply.

•  Do not connect any incompatible component or product to the Argon 

terminal.

Содержание Argon 100



























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды