Sensormetrix
Basingstoke Road
Spencers Wood
Reading
Berkshire RG7 1PW
UK
+44(0)118 976 9023
+44(0)118 976 9020
www.sensormetrix.co.uk
sales
fax
email
web
A member of the Olancha Group Ltd
Registered in England No. 4004881
VAT Registration No. GB164 5653 45
19
Argon 100
Hardware User Manual
Rev 1.2
PLEASE READ CAREFULLY
Be sure the use of this product is allowed in the country and in the environment
required. The use of this product may be dangerous and has to be used with
caution in the following areas:
•
Where it can interfere with other electronic devices in environments such as
hospitals, airports, aircrafts, etc.
• Where there is risk of explosion such as gasoline stations, oil refineries, gas
works etc.
It is responsibility of the user to enforce the country regulation and the specific
environment regulation.
Do not disassemble the product; any mark of tampering will compromise the
warranty.
We recommend following the instructions of the hardware user guide for the
correct wiring of the product. The product has to be supplied with a stabilized
voltage source and the wiring has to conform to the security and fire prevention
regulations.
The product has to be handled with care, avoid any direct contact with the pins
because electrostatic discharge may damage the product. The same precautions
have to be observed for the SIM card installation. Do not insert or remove the SIM
when the product is in power
The system integrator is responsible for the complete functionality of the final
product. Therefore, care has to be taken with the external components used with
the module, as well as any installation issue.
Should there be any doubt, please refer to the technical documentation and the
regulations in force. Every module has to be equipped with a suitable antenna with
characteristics which match the product requirements.
The antenna has to be installed with care in order to avoid any interference with
other electronic devices and has to guarantee a minimum distance from the body
(20 cm). In case this requirement cannot be satisfied, the system integrator has to
assess the final product against the SAR regulation EN 50360.
Safety Recommendations
