Sensor Technology RWT440, Руководство пользователя

Страница: 38 / 79

Transducer Control 5 User Manual (RWT3746IM)
Revision 7, September 2020 - Page 6
The options prefixed with
“AUTO” will search for multiple transducers, whereas the
other options will search for a single transducer on a specific port.
AUTO ETHERNET
AUTO ETHERNET looks for network connected transducers. It does this by
sending a broadcast packet on the configured port for all connected network
interfaces.
AUTO RS232
AUTO RS232 will search for connected transducers on all the systems detected
RS232 ports.
AUTO USB
AUTO USB will search for connected transducers on the hosts USB ports.
NET
– HOST:PORT
Any options prefixed with NET, are custom hostnames/IP addresses added by the
user. These hosts
identify individual ethernet modules. See the “Ethernet Search
Parameters” option.
RS232 - COMx
RS232 - COMx will search for a connected transducer on the selected COM port.
Select the filters required by clicking on the relevant options. To search, click on the
“Search” button. Transducer Control will then search for compatible transducers using
the filters supplied. During this process the window will update to indicate the progress
of the search, transducers will be added to the list box as they are found.
If a single transducer is detected the program will automatically initialise the transducer
and load the main window. If multiple transducers are detected, the dialog box will
require the user to make a transducer selection. To select a transducer, click on the
transducer from the list. The transducer will then be initialised and used by the
program.