Operator Manual
Page
26
of
40
P/N 1580281
SEC3120 Digital Transmitter
Sensor Electronics Corporation
Rev 10, 20150707
change the value to either
‘EIGHT’ or ‘NINE’.
The operator may change the
stop bits by moving the cursor to
STOP BITS and select ENTER,
then using the UP/DN arrows to
change the value from either
‘ONE’ or ‘TWO’.
The operator may change the
parity checking by moving the
cursor to PARITY and select
ENTER, then using the UP/DN
arrows to change the value from
‘NONE’, ‘ODD’ or “EVEN’.
The operator may change the
baud rate by moving the cursor
to BAUD RATE and select
ENTER, then using the UP/DN
arrows to change the value to
one of {1200, 2400, 4800, 9600,
19200 and 38400}.
Return to the 485 bus menu and
save the changes by moving the
cursor to the next screen and
select ENTER.
Scroll down to PREVIOUS MENU and
select ENTER to return to the Modbus
Settings Menu Screen.
Scroll down to PREVIOUS MENU and select ENTER
to return to the Main Menu Screen.
Select ENTER on SAVE CHANGES to return to the
Main Menu Screen.
9.
Sensor Calibration
Calibration Menu (Selected from the Main Menu)
ENTER to select the calibration menu.
*
CALIBRATION
ALARM
RELAY
NETWORK
DATA BITS EIGHT
*
STOP BITS TWO *
PARITY NONE
BAUD RATE 9600
DATA BITS EIGHT
STOP BITS TWO
*
PARITY NONE *
BAUD RATE 9600
DATA BITS EIGHT
STOP BITS TWO
PARITY NONE
*
BAUD RATE 9600 *
*
PREVIOUS MENU
NETWORK ID MENU
MODBUS SETTINGS
*
PREVIOUS MENU
* SAVE CHANGES
ABORT CHANGES
COMM- DEFAULT
COMM- ALTERNATE
COMM- CUSTOM
*
PREVIOUS MENU
