Part Number: 1460105
REV: A
To Span the sensor with calibration gas use the Up and Down arrows to select the following display.
Apply span gas to the sensor for the appropriate amount of time in order for the sensor to stabilize. The gas
reading is displayed to the right of ZERO. Once stable select Enter. This will go the display:
If calibration span gas is still present the display will read:
Apply clean air to the sensor to reduce this reading.
The display will advance to the following:
This completes the calibration and the device can be put back into the normal operating mode.
Arrow Down to
Enter
Enter again and the SEC 3100 returns to normal operation.
ZERO
3
* SPAN
CAL. VAL
EXIT
CALIBRATION PROCESS
------- DONE ----------
GAS LEVEL : 5
CALIB. GAS PRESENT
---- WAIT ----
* ZERO
0
SPAN
CAL. VAL
EXIT
ZERO
SPAN
CAL. VAL
* EXIT
* EXIT
