Sensopart SmartRange FR 90 ILA, Руководство по эксплуатации

Страница: 13 / 18

Operating manual Fx9x .
VI. Technical data
FR90ILA-S2-Q12 FT90ILA-S2-Q12 FR91ILA-S2-Q12 FT91ILA-S2-Q12
Electrical data
(Reflector device) (Proximity) (Reflector device) (Proximity)
Supply voltage
Residual ripple
Power consumption
Q1 / Q2 outputs
Plausibility output Qp
Service output Qs
Protection class
Short-circuit protection (all outputs)
Reverse battery protection
Serial interface
Bus interface
Maximum cable length
Analog output
no 0 - 20 mA no 0 - 20 mA
Optical data
Measuring ranges
Reflector (specified)
0.5m to 250m 0.5m to 50m
black 6% 0.5m to 3m 0.5m to 2m
grey 10% 0.5m to 7m 0.5m to 4m
white 90%
0.5m to 10m 0.5m to 6m
Measuring laser
Diameter of light spot
20x20mm @ 10m 3x10mm @ 4m 20x20mm @ 10m 3x10mm @ 4m
Pilot laser
Switching points
Switching hysteresis
Mechanical data
Dimensions
Weight
Vibration / shock
Ambient operating temperature
Storage temperature
Protection
Connection
Housing material
Measured values
Resolution (output of meas. values) 0.1mm or 0.125mm 0.1mm or 0.125mm 0.1mm or 0.125mm 0.1mm or 0.125mm
Repeatability
+/- 2 mm +/- 4 mm +/- 5 mm +/- 5 mm
Linearity +/- 10 mm +/- 10 mm +/- 15 mm +/- 15 mm
Response time 12 ms 12 ms 12 ms 12 ms
Temperature drift < 0.5 mm/K < 0.5 mm/K
Thermal response < +/- 5mm absolute < +/- 5mm absolute
Speed of measurement output
Distance measuring devices Reflector device
18 - 30 VDC
10% inside Ub
< 4.5 W at 25 degrees C
100 mA, PNP
50 mA, PNP (N.O.)
50 mA, PNP (N.O.)
II double-insulated
yes
yes
RS 422 or SSI - compatible (GRAY / BINARY)
Profibus or DeviceNet via respective gateway (accessory)
100 m
IR 900 nm, laser protection class 1
-10 to + 50 degrees Celsius (-20 to +50 in continuous operation)
red 650nm, laser protection class 2
adjustable in 1mm steps
min 10mm (adjustable) min. 20mm (adjustable)
All indications regarding accuracy and distance are based on the specified surface at constant ambient conditions and with a minimum operating time of
15 minutes.
-30 to + 75 degrees Celsius
IP 67
12 pin connector, M16
ABS shock-resistant
SSI: 1.4ms (SSI cycle 80 µ s; RS 422 2.9ms at 57.6 kBaud)
93mm x 93mm x 42mm
approx. 230 g
EN 60947-5-2
SensoPart Industriesensorik GmbH, D-79695 Wieden, Tel. +49 (0)7673 821-0 Fax +49 (0)7673 821-30 www.sensopart.de Page 13
Status 21.10.2004 Software 1.51 and higher 068-13621