MT4299E Rev.1
15/10/2019
Pagina 46 di 55
ALARMS
Choosing the Alarms LOG option enters the Alarm events list.
Using the up/down arrow keys one may search in the Alarm event log
FLT & SYSTEM
Choosing the Fault & System LOG option enters the faults and system events list.
Using the up/down arrow keys one may search in the Flt & fault event log
SETTINGS
Choosing the Settings LOG option enters the Settings events list.
Using the up/down arrow keys one may search in the Settings event log
FULL LOG
The FULL LOG option shows all the events, in chronological order, starting with the
most recent.
Using the up/down arrow keys one may search in the event log
4.5.3)
If a Printer is connected to the control panel and in the Set Printer Mode the On
Request parameter is selected (see next paragraph 4.5.5), by selecting PRINT and
pressing ENT one starts the printout of the system detector list with all the programming
data (Zone, detector description, Alarm levels etc.).
ABORT PRINT
To stop and cancel the printout
SET PRINTER MODE (Users level “M” and “E”)
This parameter is used to select the print mode.
ON REQUEST
In this case, the control panel only prints specific details (Event Log, detector list etc.) at
the user’s request, in the different menu. The printer can be connected and
disconnected at any time as required.
REAL TIME
This option switches the printer to on-line mode and requires that a printer be
continuously connected to the system. Events are printed as and when they occur.
NOTE: If Real Time is enabled, the event log and other options will not be printed at the
us
er’s request. The Real Time parameter must be disabled to permit all other print
option to operate.
