MT4299E Rev.1
15/10/2019
Pagina 32 di 55
3.7.3)
Detector identification
Every detector connected to the control panel is identified by a code which allows its
configuration and contains all the principle data required to physically identify it.
For example:
CHN 02001
Indirizzo modulo IN/8 o rilevatore gas
(Module IN/8 or detector address)
da 0 a 255 (from 0 to 255)
Posizione rilevatore da 01 a 08 se modulo
IN/8 oppure 00 se rilevatore collegato su bus
(detector position from 01 to 08 if IN/8
module or 00 is detector on the bus
1
Numero bus (1-4)
(bus number (1-4))
Fig. 3.7.3) Detector number indication
3.8)
Programming by PC
The MU+PK control panel is fully programmable only by a personal computer
with a dedicated configuration software (included). The software has been designed to
make the control panel programming simpler and faster.
The control panel can be connected to a Personal Computer using the RS232C serial
port available on the back panel.
The correct serial connecting cable is necessary to connect the control panel to the
computer. (The connector pin layout is shown below)
Fig. 3.8) PC Connection cable
