Hardware Configuration Instructions
for TTRF Infrastructure
©
SENSITECH INC
REV A
9/6/2005
4
Section 1: Hardware Configuration Instructions for TTRF Infrastructure
These instructions guide a technician through the installation and configuration of the TempTale
RF infrastructure.
Equipment
•
RS232 Serial cable (1)
•
TTL Converter (1)
•
RJ45 Ethernet crossover-cable (1)
•
TTRF Gateway (1)
•
Repeater
(1)
•
Gateway Power Adaptor (1)
•
Repeater Power Adaptor (1)
•
PC with Start Hyper Terminal installed
•
PC with scientific calculator
•
Ethernet
connection
Configuring the TTRF Gateway for a static IP address or DHCP agent
Gateway
2
1) Make sure power is off on the TTRF Gateway.
2
Repeater/Signposts use the same Motherboard.
