Software Installation Instructions
TTM Remote Site Server
©
SENSITECH INC
REV A
9/6/2005
10
Section 2: Software Installation Instructions TTM Remote Site Server
These instructions guide a technician through the installation and configuration of the TempTale
Manager Remote Site Server software installation.
System Requirements
•
All RF hardware has been configured, installed and verified.
•
Windows 2000 Professional with latest Service Pack (SP)
•
Windows XP with latest SP
•
Anti Virus Software
•
Direct internet connection
•
Internet Explorer 6.0 Service Pack 1
•
Dedicated Internet Connections
•
All event logs should be set to “overwrite as needed”.
Configuration Values Required
•
IP or Name of Client Computer gateway is connected to.
•
IP or Name of machine SNMP manager is running on.
•
Application ID of monitors being used in application.
•
Location of rfupload folder where data files are to be sent.
Media
•
TempTale Manager Remote Site Server ver 5.1
Installation
The Following application and services will be installed
•
TTM Desktop ver 4.2
•
TTRF Service ver 1.0
•
Receive RF Data ver 1.0
•
Send Data to Central Site ver 1.0
1) Click the Windows start button and select “Run”, browse to the Install.bat file located on the
CD media and select “open”. This will add the location of the .bat file to the run dialog. Place
cursor in dialog box after the file location. Now add the value in quotes of where the software
is to be installed, leaving a space between the two. For example: d:\install.bat “C:\Program
Files”
Note:
Leaving the destination blank will install the software to the system’s default
program files directory.
2) This .bat file will launch 2 silent installs, one installing TTM Desktop and the second the
services listed above.
