SENSIT Technologies GOLD G3, Инструкция по эксплуатации

Страница: 42 / 48

42
SMART-LINK
STANDARD FEATURE
The
SENSIT GOLD G3
is compatible with
SMART-LINK 360
software. This software package
allows the user to download the logs out of the
G3
with a Bluetooth connection.
This section shows how to enable
SMART-LINK
mode on the
G3
. For further information on
Smart-Link 360
software, consult the instruction manual or contact
SENSIT Technologies
.
TO ENABLE SMART-LINK MODE:
1. From the work display, press and hold the
B
button until
USER MENU is shown near the
top of the display.
2. Press and release the
C
button until
SMART LINK
is shown.
3. Press and release the
B
button.
SMART LINK
ENABLED will be displayed. The instru-
ment is now ready for communication.
CALIBRATION NEXT DUE
STANDARD FEATURE
The calibration next due menu displays the next due date for calibration for all sensor installed in
the
SENSIT GOLD G3
. This is same screen that displays during startup. Both the next due date
and the days remaining until that date will be displayed for each sensor.
TO VIEW THE NEXT DUE DATE(S):
1. From the working display, press and hold the
B
button until USER MENU is shown near
the top of the display.
2. Press and release the
C
button until CALIBRATION NEXT DUE is shown near the top of
the display. The next due date and days remaining until that date will be shown for each
installed sensor.
3. Press and release the
A
button to return to the work display.
BARHOLE PURGE THRESHOLD
STANDARD FEATURE
After a BAR HOLE TEST is performed using the
SENSIT GOLD G3
, a built-in purge option
lets the user automatically purge the instrument of gas before another test is completed. By
default, this purge requires that the reading on-screen reach 0.0% volume to be successful, before
another BAR HOLE TEST can be completed.
At the operator’s option, this “threshold” can be raised from 0, up to a maximum of 9.0%, if it is
deemed that it isn’t necessary to completely purge the instrument.
TO ADJUST THE BAR HOLE PURGE THRESHOLD:
1. From the work display, press and hold the
B
button until
USER MENU is shown near the
top of the display.
2. Press and release the
C
button until BAR HOLE PURGE THRESHOLD is shown.
3. Press and release the
B
button to select and enter the
BAR HOLE PURGE THRESHOLD
menu. The current saved setting will be displayed (0.0% by default).