SENSIT Technologies GOLD G3, Инструкция по эксплуатации

Страница: 21 / 48

21
5. Follow federal, state, municipal, and/or company procedures to conduct the CO TEST.
Insert the probe into the sampling point and press and release the
B
button to start the
test. The countdown timer will begin (180 sec by default). The real time CO reading will
be shown in the middle of the display and the peak CO reading will be shown on the right
side of the display. The test is over when the timer reaches 0. The results will remain on the
display and a log of the test will be saved with the test number, date and time, and test
results.
6. If you have another test to take, remove the probe from the test location and press and
release the
C
button to purge the gas out of the instrument. The purge process will start
and continue until the desired setpoint is reached. This is set to 0PPM by default and
adjustable in the User Menu. When the purge stops, insert the probe into the next location
and press and release the
B
button to start another test.
7. To exit CO TEST, press and release the
A
button once to return to the QUICK MENU, and
twice to return to the work display.
⚠
WARNING:
Metal portion of probe may be hot and cause burns.