Sensidyne Gilian Gilibrator STABLFLOW, Руководство по эксплуатации, Страница: 38 / 46

© 2018 Sensidyne, LP Sensidyne Document No. 360-0213-01 - Rev B
Page 32
Gilian Gilibrator 3 ® Dry Cell Calibrator – Operation Manual
4.5. Reports and Data Storage
The Reports Screen will update once you have saved your record. The Report Screen
displays the most recent calibration reports by date, allows for preview and export of
reports, and for deletion of single or all reports.
Reports are stored in internal memory in a native format. If the user changes
measurement units after the report is saved and previews or exports the record again,
the data will be shown with the new unit settings.
If an existing sample ID is found in the internal memory when the SAVE button is
pressed, the user is prompted to save this record as a post-cal linked to the first record
denoted with a _# behind the sample ID in the reports table (ex. Sample ID_#).
When a record is exported to the SD card, the folder REPORTS is created if it does
not exist. A folder with the sample ID name is created inside it, and the CSV and BMP
files are saved with the sample ID as a file name (ex: D:\REPORTS\Test 1\Test 1.bmp
and D:\REPORTS\Test 1\Test 1.csv). If a post-cal record is created and exported to
the SD card, the files will also appear in the same sub-folder. The post-cal files will be
denoted with a _# behind the sample ID (ex: D:\REPORTS\Test 1\Test 1_#.bmp and
D:\REPORTS\Test 1\Test 1_#.csv).
If a linked post-cal record is deleted, a new post-cal record should be saved before
exporting. If the pre-cal record is deleted, the user must delete the post-cal record as
well. If the SD card already contains an exported record with the same sample ID, a
window will appear asking, Overwrite existing file? The user must confirm to overwrite
it. If the user attempts to save a record to internal memory that already has 100 records,
the new record will not be saved. When the memory is full. One or more records must
be deleted prior to saving the new record.
A Reports Screen reference display is outlined in the following table.
Display Image Description
Most Recent Reports Screen. Report Screen displays the
most recent calibration reports. The reports are sorted
by Date and Time, with the most recent at the top of
the list.
Note: The PostCal Reports are denoted with the _#
after the sample ID.
Page Up and Page Down arrows will become
highlighted when seven or more records have been
stored.
Note: The Base Control Unit will store up to 100
reports in the active memory.