9
4.3
Mounting the BBS
4.3.1
Mounting the BBS Module:
1) Shelf
Mounting:
Mounting brackets are not required.
a)
Locate the keyholes at the right and left side of the chassis flanges. See BBS module
footprint on Figure 3 below.
b)
Screw or bolt the keyholes using ¼ inch diameter screws.
c)
Make sure the BBS is firm and secure.
FIGURE 3:
BBS Module footprint
4.3.2
Mounting the Manual Bypass Switch - 30A Transfer Relay
(Open Frame 511016-1)
a)
Locate a secure and appropriate cabinet shelf as shown in figure 4 below, see also
figure 7 on page 12.
b)
Using the washers and bolts provided fix the combined manual bypass switch - 30A
transfer relay (open frame) as shown on Figures 4 below.
FIGURE 4:
CMBPS-30ATR open frame shelf mounting and footprints
Shelf
3.5”
3.5”
2.3”
1.8”
1”
0.5”
0.5”
2.5” 6” 2”
11”
0.35”
0.75”
Front
