Sensaphone Sentinel Pro Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 44

Sensaphone Sentinel Pro Скачать руководство пользователя страница 29

29

Chapter 3: Configuring the relay outputs

ChapTer 3: ConfIGurInG

The relay ouTpuTs

The Sentinel Pro includes two relay outputs that can be used to control a light, siren, or other low

voltage device. The output can be configured to switch either manually or automatically when a zone

changes state or exceeds the alarm limits. To program the output click

Output

from the

Device Details

or

Configure Device

screen. The following configuration page will appear:

Enter a Name so that you’ll know what the Output will be controlling. The Output can operate in

Manual mode or Automatic mode. In manual mode you can turn the relay ON or OFF through the web

page or the mobile App. To manually switch the relay output, click in the State field and select either ON

or OFF, then click

Save Changes

. The change request will be sent to the Sentinel and the

Current Value

will update after the output change has successfully completed.
In Automatic mode the relay can be programmed to turn-on automatically when certain conditions are

met. Listed below is a description of the parameters that apply to the automatic modes.

Input Selection

- Next to the Automatic mode selection box is another drop-down that allows you to

select which zones will control the output. There are four options (Zone List, Type List, All Inputs, and

Limit: Zones).

Zone List: This option allows you to individually select which zones will cause the output to

switch. Check the boxes next to the desired zones.
Type List: This option allows you select zones based on the zone Type. For example, you could

have all of the zones configured for Temperature control the output.
All Inputs: This option selects all of the inputs (zones).
Limit: Zones: This option allows you to independently control the output based on the value of

one or two zones using greater-than, less-than, or equal-to comparison statements. A separate

Output-On and Output-Off instruction can be configured with its own comparison value. See

sample below:

«
...
27
28
29
30
31
...
»

Содержание Sentinel Pro













































Отзывы:

Нет отзывов