Sensaphone Sentinel Pro, Инструкция по установке и настройке, Страница: 26 / 44

26
Sentinel Pro Installation and Setup Guide
*Note that the Tier Delay timer starts at the time the alarm occurs. If the alarm is acknowledged before
the delay time expires then Users in the 2nd Tier (and beyond) will not receive the alarm message. See
sample programming screen below:
Zone alarm delivery schedule
A Zone Alarm Delivery Schedule is an alarm contact list that only applies to one specific zone. You
can create a separate Zone Alarm Delivery Schedule for each individual zone if required. To configure
a
Zone Alarm Delivery Schedule
select a Zone from the
Device Details
page. Then click the
Zone Alarm
Delivery
tab on the right. Select
Custom
to configure a contact list for the selected zone. Follow the steps
as described above to complete the schedule.
quick-add destinations
Quick-Add Destinations are those that can be easily entered to the notification list without creating a
User Account. Note, however, that destinations added here will be inform-only (e.g. cannot acknowl-
edge alarms ). This entry method is useful for sending messages to people who do not require a user
account in the system but may want to be informed when a particular alarm occurs.
alarm acknowledgment
Alarms can be acknowledged from the dashboard page by selecting a device using the checkboxes next
to each device, and then clicking the “Action” drop-down at the top of the screen. You can acknowledge
both Device Offline alarms or Zone alarms. Devices with ‘Unacknowledged’ alarms are identified with
an exclamation point within a triangle. Once the alarm is acknowledged this symbol will disappear. You
can acknowledge multiple alarms on multiple devices at the same time. Alarms can also be acknowledged
during telephone calls by entering 555 when prompted, or by replying to alarm messages sent via email,
or by replying to a text message with the letters “Ack”.
logs
The Sentinel Pro includes an Alarm Log and Data Log. The Alarm Log lists all alarm activity for the
selected device. You can narrow down the messages by individual zones or you can select multiple
zones. The Data Log contains the recorded values for each zone based on the parameters you set up on
the Zone Configuration screens. You can display the values on the screen as well as graph them. There is