Sensaphone Sentinel Pro, Инструкция по установке и настройке, Страница: 23 / 44

23
Chapter 2: set up
Manage users
The sensaphone.net website allows you to set up users that will be linked to your account. Each user can
be configured to have their own login for website access and/or be contacted for alarms. In addition, you
can choose to give alarm acknowledgement capability to each user.
There are several levels of permissions that can be assigned to each user. You can also enter contact
information for alarm delivery purposes. From the main menu, select Users , then Manage Users . To add
a new user, click on the Add User button. The example below shows a user setup as an administrator
with four contact destinations.
The following defines the various permission levels:
Administrator
– Full site access, all devices on your account
Supervisor – Gives the user access to the Dashboard, device-specific pages (for example, Device
Details), Manage Users, and Manage User Groups, but for only the devices you choose for them (cho-
sen under the Device Groups section of the form). Supervisors will have the ability to create new
users, but they can only give the users Supervisor access or lower.
User
– Gives the user access to the Dashboard, but only shows the devices you choose for them (cho-
sen under the Device Groups section of the form)
None – No access to the website
Alarm Delivery
– Choose whether you would like the user to be able to receive alarm notifications or
not.
Disabled
– No alarm delivery
Inform Only – User is notified about the alarm, but cannot acknowledge it
Allow Acknowledgement
– User is notified about the alarm and is able to acknowledge it
user Information
Next, enter details about this user. The user’s name is the only required information.
Contact details
The Contact Details section is where you enter the telephone numbers, text numbers, and email
addresses to send alarm messages. { Note that phone calls and text messages require a Premium Ethernet