Sensaphone Sentinel Pro Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 44

Sensaphone Sentinel Pro Скачать руководство пользователя страница 10

10

Sentinel Pro Installation and Setup Guide

abouT ThIs Manual

This manual comprises the instructions necessary to install and setup the Sentinel Pro. You should thor-

oughly read this manual to establish a basic understanding of the system and keep it as a reference.

InsTallaTIon and ConfIGuraTIon

physICal desCrIptIon

The Sentinel Pro is housed in a 6.8” x 6.3” x 1.5” enclosure, which can be easily mounted on a wall or

back panel.

layout

The Sentinel Pro has connections for twelve sensor inputs, two relay outputs, an Ethernet port, and

12VDC power. See figure below:

Figure 1: Front Panel Layout of the Sentinel Pro

1) Acknowledge/Standby Button

6) Power Jack

2) On/Off Switch

7) Ethernet Jack

3) Power, Online, Standby LEDs

8) Sensor Input Terminal Strip

4) Alarm LEDs
5) Relay Output LEDs (yellow)

9) Relay Outputs
10) Modbus RS485 Terminal Strip

rJ-45 10/100base-t ethernet port

This jack is for connecting to your network so that the device can communicate with the Sentinel Pro

servers. Two LEDs indicate when the Sentinel Pro has a valid link (green) and transmitted/received data

(yellow).

sensor Inputs

The sensor inputs labeled zones 1-12 are designed to interface with normally open/normally closed

devices, 2.8K or 10K temperature sensors and 4-20mA transducers.

poWer on led (green)

This light indicates that the Sentinel Pro unit is powered and operational.

alarM leds (red)

The Alarm LEDs indicate if an alarm exists.

«
...
8
9
10
11
12
...
»

Содержание Sentinel Pro













































Отзывы:

Нет отзывов