SENS IQ Technical Manual
26
Service Hotline: 1.800.742.2326
1.303.678.7500
ESD SHIELD
NOTE:
ESD Shield must remain in
place at all times
10
BLACK BOX DATA RECORDER
1. Using the User Interface Display menus, scroll down to the OTHERS menu.
2. Once at the OTHERS menu, scroll right to “Remove/Install Black Box Data Recorder”
3. It is now safe to remove or install the Black Box Data Recorder
4. If removing Black Box Data Recorder, record the date and time
5. Press ENTER/BACK to return to the main menu
10.1
Procedure to remove/install Black Box Data Recorder
Chargers equipped with the Black Box Data Recorder come with a memory card located on the Control
Printed Circuit Board (see
FIG 11
). The
Black
Box Data Recorder
keeps permanent record of DC voltages
and currents, alarms, user adjustments, temperatures, battery check outcomes, input supply, and discharge
durations.
Contact SENS (1-800-742-2326 or www.sens-usa.com) for assistance downloading and analyzing history
data. User must document date and time Black Box Data Recorder is removed from charger to maintain
accurate date and time for logged data.
CAUTION:
To prevent data loss or corruption, the Black Box Data Recorder must be removed or
installed by following the steps below.
BLACK BOX DATA
RECORDER
Figure 11: Black Box Data Recorder
