Setting up the SDC 8200 system
58
The channel assignment for the four other audio outputs can be changed
as described in the section “Assigning a channel to an audio output” on
page 107. You can assign these outputs any interpretation channel or the
floor channel.
Note!
The audio signal of the channel assigned to the output AUX OUT 6 (pin
6 and 14 of the 15-pole sub-D socket) is also available at the
headphone output of the central unit!
Connecting an SDC 8200 AO analog output unit to the SDC 8200 CU
central unit
You can output additional interpretation channels via the SDC 8200 AO
analog output unit’s transformer balanced XLR-3M audio outputs or via
the unbalanced phono sockets next to the XLR-3 outputs.
To connect an analog output unit to the SDC 8200 CU central unit:
왘
Connect the black RJ 45 plug of the system cable to the DATA OUT
socket
of the central unit.
왘
Connect the grey RJ 45 plug of the system cable to the DIGITAL BUS IN
socket of the analog output unit.
Connecting several SDC 8200 AO analog output units to the SDC 8200 CU
central unit
To connect several SDC 8200 AO analog output units to the SDC 8200 CU
central unit:
왘
Connect the DIGITAL BUS OUT socket of the first SDC 8200 AO to the
DIGITAL BUS IN socket of the second SDC 8200 AO, and so on.
Note!
You can connect up to four SDC 8200 AO analog output units to the
SDC 8200 CU central unit.
Содержание SDC8200
Страница 1: ...Conference System SDC 8200 System Manual...