Sennheiser SDC 3000, Системное руководство

Страница: 34 / 126

Selectable conference modes
36
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
“Request” mode
In “Request” mode, a participant has to “apply” for a comment and wait
until the chairperson activates the microphone of his or her console.
A participant has to “apply” for a comment by pressing the MIC key of
the delegate unit. The signal light ring and the LED of the delegate
unit start flashing. However, the participant cannot yet speak.
The chairperson activates the microphone of the participant by pressing
the
P1 key . If this is done, the signal light ring and the LED of the
chairperson unit flash up once. The signal light ring and the LED of
the delegate unit light up permanently and the participant can take the
floor.
In “Request” mode, – depending on the speaker limit – a maximum of six
participants can take the floor simultaneously. In addition, the next nine
participants who make a request to speak will join a request-to-speak list.
The signal light ring
and the LED of the delegate unit of these
participants start flashing, indicating that their request to speak has been
accepted. If a tenth participant “applies” for a comment, the signal light
ring
and the LED of his or her console flash up once, indicating that
the application has been rejected (because the limit of nine applications
has already been reached).
By pressing the P2 key , the chairperson turns off all active microphones.
He can then turn on the microphones of up to six participants from the
request-to-speak list.
By pressing the P1 key , the chairperson turns off the microphone of the
first speaker in the discussion group and activates the microphone of the
first participant from the request-to-speak list.
Via the chairperson channel of the SDC conference system, the chairperson
can join in a discussion without limitations (e.g. limited speaking time) by
simply pressing the
MIC key . The chairperson can then take the floor
immediately. If a conference has more than one chairperson, their
chairperson units function like normal delegate units, i.e. the chairpersons
can take the floor immediately, provided that the preset speaker limit has
not yet been reached. If the limit for simultaneously active microphones
has been reached, the chairpersons have to wait until it is their turn to
speak. If the chairperson using the chairperson channel has finished
speaking and turns off the microphone by pressing the
MIC
key once
more, another chairperson can join in the discussion via the chairperson
channel.