Sennheiser SDC 3000, Системное руководство

Страница: 100 / 126

Assigning microphones to the conference console icons
102
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Assigning microphones to the conference console icons
If the location plan of your conference is completed, the consoles have
been assigned the names of the participants and the technical details have
been specified, you now have to assign real microphones to the conference
console icons of your location plan.
First make sure that your Central PC is connected to the central unit
via the serial interface and that all conference consoles are correctly
connected to the central unit.
Make sure that the number of the COM port is correct (see “Specifying
the COM port” on page 100).
From the “Editor” menu, select “List Microphones” to open the “List
Microphones” dialog box. Alternatively, press the “F5” key.
In the “List Microphones” dialog box, click the
button.
The button turns green and “PC-Mode” appears on the central unit’s
display.
One after another, press the “ MIC ” key of all conference consoles – but
maintain the order in which the conference consoles are listed in the
“List Microphones” dialog box!
Alternatively, you can click a conference console in the “List
Microphones” dialog box and then press the “
MIC
” key of the
corresponding conference console.
The LED next to the “
MIC ” key as well as the red signal light ring on the
microphone light up. In the “List Microphones” dialog box, the three-
digit microphone address appears next to the “Y” in the “Mic” column.