Sennheiser SDC 3000, Системное руководство

Страница: 33 / 126

Selectable conference modes
35
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
“Overrun” mode
In “Overrun” mode, the preset speaker limit is very important.
If the preset limit for simultaneously active microphones has been
reached, a participant can immediately take the floor when pressing the
MIC key . The signal light ring and the LED of the delegate unit light
up permanently.
If the speaker limit has been reached and the next participant presses the
MIC key to join in the discussion, the microphone of the first speaker in
the discussion group will be turned off (FIFO First-In-First-Out).
The chairperson has two options to join in a discussion:
1. Via the chairperson channel of the SDC conference system, the
chairperson can join in a discussion without limitations (e.g. limited
speaking time) by simply pressing the
MIC key . The chairperson can
then take the floor immediately. If a conference has more than one
chairperson, their chairperson units function like normal delegate
units. If the chairperson using the chairperson channel has finished
speaking and turns off the microphone by pressing the
MIC key
once more, another chairperson can join in the discussion via the
chairperson channel.
2. By pressing the P1 key , the chairperson can interrupt a discussion
any time. When the
P1
key is pressed, all active microphone of the
conference consoles are turned off and the chairperson can take the
floor immediately. By pressing the
P1 key once more, the previously
deactivated microphones are turned on again.