Sennheiser LSP 500 PRO, Инструкция по эксплуатации

Страница: 60 / 66

60 | LSP 500 PRO
If a problem occurs ...
Error and warning messages on the display of the LSP 500 PRO
Indications on the display panel Meaning Possible solution See
Lock mode is activated Deactivate the lock mode. page 18
Network connection has failed Access point: Check the
DHCP and IP configuration.
LSP 500 PRO: Check the
SSID and the network
key, check the IP assign-
ment mode or the IP
configuration.
page 42
Entered network key is not
correct Enter the network key
again. page 50
No network found Check the available access
points and their ranges.
Battery charge status < 21% Replace the battery pack;
connect the LSP 500 PRO to
the mains power supply. page 11
Battery charge status < 6% Replace the battery pack;
connect the LSP 500 PRO to
the mains power supply. page 11
Critical temperature rise Reduce the volume; ensure
sufficient cooling.
Overheating; emergency
shutdown of the power
output stage Ensure sufficient cooling;
switch off the LSP 500 PRO
and let it cool down.
It is possible that several error and warning messages are displayed one after the other.