48 |
LSP 500 PRO
The operating menu
Selecting a network and connecting the LSP 500 PRO to the
selected network
To select a wireless network and to connect the LSP 500 PRO to the selected
network:
X
In the
WLAN
menu, turn the
MENU
jog dial until the
SSID LIST SELECTION
menu
item is displayed.
X
Press the
MENU
jog dial to open the
SSID LIST SELECTION
menu item.
When opening this menu item for the first time, a scan for available wire-
less networks is run.
SCANNING NOW
appears on the display panel and the
WLAN icon flashes in the status area.
The available networks are then shown on the display panel. Encrypted net-
works are marked with a lock icon.
X
If the desired network does not appear in the list of networks, press the
SLOT 3
jog dial (
REFRESH
function) to run a new scan for available networks and to
update the list.
X
Turn the
MENU
jog dial to browse up or down through the available networks.
X
Press the
MENU
jog dial to establish a connection to the selected network.
A tick (
) next to the network name indicates the network to which the
LSP 500 PRO is connected. A cross (
) next to the network name indicates
that a connection to this network is not possible since the encryption of the
network is not supported by the LSP 500 PRO.
If a network is not encrypted, the connection is established immediately. If
a network is WPA2-encrypted, you first have to enter the network key. For
information on how to enter the network key, refer to page 50.
SSID List Selection
